How To Order
To order the strip light to a specific length (eg 1.3 meters) simply choose the “per meter length” option.
As this strip is charged as a per meter length simply choose quantity 2 and add to cart. You can then “add cart note” and type in the cart note that you require the strip to be 1.3 meters in length.
If you are unsure of this process or you would like some expert guidance please call our office on 1300 589 726.
Alternatively you can choose to order a 5 meter uncut reel of strip and cut it on site to suit your required length. This strip is sent with a couple of end caps to seal the strip once it is cut to ensure it remains IP rated.
LED Driver Required
To operate the LED strip you will need to connect the strip to a 24 volt constant voltage LED driver. This strip has a power rating of 15 watts per meter. To safely operate the strip we recommend a minimum of 20 watts per meter. Based on this theory, if you are operating 1.3 meters of strip we would recommend the 24 volt 30 watt constant voltage LED driver.
We can supply a LED driver attached to your custom strip upon request to allow for DIY installation. To make this request please “add cart note” to your order.
COB flexible strip light offers a seamless visual linear light, eliminating any visual dots often found with traditional strip light. Ideal for installations where the LED strip will not be mounted within profile but seen.
This LED strip light is rated at 15W/m, producing high levels of light.
CRI is >90, which provides very high true colour representation.
COB is an acronym for: Chip on Board
The PCB is made using 3oz copper, this reduces voltage drop, so allows for a continuous 10m length without visible loss of brightness.
The thermal efficiency of this LED strip means it does not require a heatsink allowing it to be mounted to almost any smooth hard surface.
This LED strip carries an IP rating of 67, suitable for all environments, however we discourage submersion. This product is also stocked in IP20 indoor classification.
| Electrical Data | |
|---|---|
| Voltage | 24 VDC |
| Wattage 1m | 15 W |
| Current 1m | 0.6 A |
| LED Data | |
| Package Type | COB (Chip on Board) |
| Chips LED | 1 |
| LEDs 1m | 528 |
| Photometric Data | |
| Colour Temperature | 4000K |
| Colour Rendering Index Ra | >90 |
| Luminous Flux 1m | 1584 |
| Luminous Efficacey | 110 |
| Beam Angle | 120° |
| Dimmable | 1 ∼ 100% (refer data sheet) |
| Construction / Protection Data | |
| Substrate | Double layer FPCB 3oz |
| Mounting | Double sided tape 3M 9080 |
| IP Rating | IP67 |
| Operating Temperature | -20 ∼ +70 C° |
| Storage Temperature | -20 ∼ +50 C° |
| Dimensions | |
| Cutting increments | 45.45mm |
| Length | 5m |
| Width | 14.0mm |
| Height | 5.0mm |
| Lifetime | |
| Working Life | 70,0000 hrs |